10 in stock
The BTI-21 Hot Air Oven (GMP MODEL) has double wall construction.
The apparatus is fully made of Stainless steel Inner S.S.316 & Outer 304.
Rs.49,920.00 – Rs.110,760.00
The gap between the two walls filled with glass wool insulation. Temperature controlled by microprocessor based digital temp. Controller with PT100 as sensor & safety thermostat. Supplied with s. s wire mesh shelves and silicon gasket on door with Air circulation fan.
Temp. Range: 50 °C to 250 °C accuracy +/-1 °C.
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Variation Codes | 14”x14”x14”, 18”x18”x18”, 18”x18”x24”, 24”x24”x24”, 24”x24”x36” |
The BTI-14 Filter Holder are for vacuum filtration and are 47mm S.S holders.
The filter support is stainless steel screen.
The ring allows autoclaving with a filter in position without stick age of the filter to the support, and also protects from breakage.
It has a rim around the upper edge to simplify the positioning of the funnel and to avoid displacement of the filter and a silicon O-Ring in the avoid.
The screen fits between top and base part, and the whole is held together with a practical hand clamp.
The holders are supplied with a silicone lid, but without a bored stopper to fit them onto a suction Flask. Such a stopper must be additionally ordered according to the diameter required.When large numbers of samples are to tested, three or six holders can be used simultaneously buy fitting them on to manifolds.
There are no reviews yet.