BTI-12 COD Digestor (Digital)
10 in stock
Digital COD Digestor suitable for COD method for monitoring wastewater influent and effluent, industrial process water, and more .
This instrument is used by Pollution control Labs.
Outer cabinet made of mild steel duly coated.
Rs.31,200.00 – Rs.46,800.00
Double wall construction with insulation for minimum heat losses increases the efficiency of the system .
Aluminum Block with holes (Dimension 40mm dia x 80mm depth).
COD tubes Aluminum block is heated to maintain temperature up to 180 °C .
Solid state digital temperature controller, appropriate heater & insulation selection assure uniformity in all the samples.
Selectable time up to 120 min with alarm is provided to set the digestion period (Refluxing)After digestion, analyses the sample with wither colorimetric or titrimetric method .
Temperature Range : Above amb. To 180 °C.
Resolution : 1 °C.
Display : Digital 12mm Red LED.
Control : Digital electronic Temp.Controller.
Heater Rating : 750 Watts.
Sensor : PT-100
Timer : Selectable 15, 30,45,60,90 or 120 min with alarm
Hole Size : 40mm dia c 80mm depth.
Glass Tube : 38 mm .dia, 15 nos
Sample Volume : 20ml, Each
Dimension : 500 W x 270 D x 210mm H
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Variation Codes | 10 Tubes, 15 Tubes, 6 Tubes |
Based on 0 reviews
Be the first to review “BTI-12 COD Digestor (Digital)”
Related products
-
-
-
-
Laboratory Instruments, Biotechnics India (BTI)
BTI-14 Filter Holder
The BTI-14 Filter Holder are for vacuum filtration and are 47mm S.S holders.
The filter support is stainless steel screen.
The ring allows autoclaving with a filter in position without stick age of the filter to the support, and also protects from breakage.
It has a rim around the upper edge to simplify the positioning of the funnel and to avoid displacement of the filter and a silicon O-Ring in the avoid.
The screen fits between top and base part, and the whole is held together with a practical hand clamp.
The holders are supplied with a silicone lid, but without a bored stopper to fit them onto a suction Flask. Such a stopper must be additionally ordered according to the diameter required.When large numbers of samples are to tested, three or six holders can be used simultaneously buy fitting them on to manifolds.
SKU: n/a
There are no reviews yet.