The body is constructed with M.S & painted with epoxy powder coated.
The tray made of S.S. shaking speed: 20 to 200 orbital storks per minute.
10 in stock
The BTI-05 Orbital Shaker consists an Analog speed indicator.
The orbit diameter of 25mm supplied with S.S. clamp for conical flask.
Rs.22,620.00 – Rs.37,440.00
The body is constructed with M.S & painted with epoxy powder coated.
The tray made of S.S. shaking speed: 20 to 200 orbital storks per minute.
Weight | N/A |
---|---|
Dimensions | N/A |
Size | 16×250 ml, 16×500 ml, 4×1000 ml, 4×500 ml, 8×250 ml, 8×500 ml |
Digital COD Digestor suitable for COD method for monitoring wastewater influent and effluent, industrial process water, and more .
This instrument is used by Pollution control Labs.
Outer cabinet made of mild steel duly coated.
The B.O.D.Incubator (GMP Model) is double walled constructed with outer body made of stainless steel 304 & inner body made of stainless steel 316.
Puff Insulation is provided between two walls.
The BTI-11 Constant Temp. water bath is rectangular shaped, double walled constructed with MS Body.
Inner chamber made of stainless steel and outer body made of mild steel duly powder coated.
The BTI-14 Filter Holder are for vacuum filtration and are 47mm S.S holders.
The filter support is stainless steel screen.
The ring allows autoclaving with a filter in position without stick age of the filter to the support, and also protects from breakage.
It has a rim around the upper edge to simplify the positioning of the funnel and to avoid displacement of the filter and a silicon O-Ring in the avoid.
The screen fits between top and base part, and the whole is held together with a practical hand clamp.
The holders are supplied with a silicone lid, but without a bored stopper to fit them onto a suction Flask. Such a stopper must be additionally ordered according to the diameter required.When large numbers of samples are to tested, three or six holders can be used simultaneously buy fitting them on to manifolds.
There are no reviews yet.